翻訳と辞書
Words near each other
・ Akalat
・ Akalathe Ambili
・ Akalathimmanahalli
・ Akale
・ Akale Aakaasham
・ Akalede
・ Akaler Shandhaney
・ Akalgarh
・ Akalgarh, India
・ Akali
・ Akali Chet Singh
・ Akali Dal (1920)
・ Akali Hanuman Singh
・ Akaflieg Stuttgart FS-23
・ Akaflieg Stuttgart FS-24
Akaflieg Stuttgart FS-25
・ Akaflieg Stuttgart FS-26 Moseppl
・ Akaflieg Stuttgart FS-28 Avispa
・ Akaflieg Stuttgart FS-29
・ Akaflieg Stuttgart FS-31
・ Akafuna Tatila
・ Akaga Glacier
・ Akaganéite
・ Akagawa
・ Akagawa Motoyasu
・ Akagawa Station
・ Akagera National Park
・ Akagi
・ Akagi (manga)
・ Akagi (surname)


Dictionary Lists
翻訳と辞書 辞書検索 [ 開発暫定版 ]
スポンサード リンク

Akaflieg Stuttgart FS-25 : ウィキペディア英語版
Akaflieg Stuttgart FS-25

The Akaflieg Stuttgart FS-25 Cuervo is a glider designed and built in Germany from 1968.
== Development ==
With the completion of the FS-23 Hidalgo and flight testing it was found that some of the expected results were not forthcoming.
Through use of the UNIVAC 1107 computer, at the ''Instituts für Statik und Dynamik ISD'', there was found to be no possible improvement of the wing section and arrangement of the FS-23. The students then concentrated on the fuselage of a new aircraft using the wing of the FS-23 extended to 15m span, with drag reduced to a minimum by reducing the wetted area of the fuselage, as a whole, and reducing the sectional area dramatically aft of the wing. The long thin tail boom, constructed with aluminium alloy, was donated by VFW(''Vereinigte Flugtechnische Werke'') at Speyer and attached to the tubular steel fuselage centre section structure.
Tests were carried out to define the best method of transferring loads between fibre-glass components and other materials. Rivetting had been used on the FS-23 through reinforcement with birch plys, but the best results were obtaind by re-inforcing with extra fibreglass plys and direct bonding without screws, bolts or rivets. The reduced cross-section front fuselage was constructed from fibreglass/balsa sandwich attached to the internal centre section tubular steel structure with a reclined seating position and plexiglass canopy hinging to the rear.
After the first flight, on 30 January 1968, Helmut Reichmann (world standard and 15m class champion) flew the FS-25 in the German national gliding championship, where he demonstrated the harmony of the controls, agility and the excellent climb performance due to the high aspect ratio and low wing loading.
Development of the FS-25 has been carried out in France at the ENSMA - ''Ecole Nationale Supérieure de Mécanique et D'Aérotechnique'' as part of the ''Société Scientifique de Recherche et de Promotion du Planeur Léger''. The ENSMA FS-25 F Cuervo has modifications to the internal structure as well as a retractable mainwheel, improved canopy and modified ailerons. A two seat version has also been developed at ENSMA, as the ENSMA Two-seater.〔Taylor, John W. R.. ''Jane's All the World's Aircraft 1982-83''. Jane's Publishing Company. London. 1983. ISBN 0-7106-0748-2〕




抄文引用元・出典: フリー百科事典『 ウィキペディア(Wikipedia)
ウィキペディアで「Akaflieg Stuttgart FS-25」の詳細全文を読む



スポンサード リンク
翻訳と辞書 : 翻訳のためのインターネットリソース

Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.